Waterproofing a tent at home

Are you afraid that a leaky tent will give you a unpleasant surprise in the middle of a rainy and dark night? Do not worry as waterproofing a tent with the help of a Dry Guy Waterproofing Spray is the simplest thing that you can do. If you get caught in a leaky tent in heavy rain it will lead to a soggy camping party, with sodden gear and clothing and can ruin a camping trip by bringing it to an abrupt end. Whether your tent is brand new or old and reliable, it is wise to test the tent for its durability before you start your camping trip. You should also ensure that the tent is waterproof as it is going to be your home for a while.

The waterproof test

The best and simplest way to test the waterproofing of a tent is to set it up including the flooring and tent fly in heavy and prolonged rains while you are at home. If that is not possible you can let loose a heavy water hose on the tent which will bring up any problems that may exist.

Once the tent has been exposed to large amounts of water whether in the rain or under a water hose, you should check the inside of the tent for leaks, paying special attention to the seams, around the windows and doors and the floor. In good tents the seams are taped and sealed while they are being manufactured. However, the seams can come apart and need repairs from time to time. This is where you can use Dry Guy Waterproofing Spray  to ensure that the seams remain intact.

You should also check the outside of the tent to see if water is soaking anywhere. This will bring out any damage to the seams or the material. To be doubly sure, pour some water in these areas and see if it forms beads and runs off. If instead the material absorbs the water then this area is in need of some attention.

If the tent doesn’t stand up to the inspection it doesn’t mean that you have to discard it and buy a new one. All you have to do is waterproof the tent and it will be as good as new.

How to waterproof a tent

The first thing to do is clean the tent thoroughly so that the waterproofing liquid will adhere to the tent material. On a dry day pitch the tent outside so that the tent will also dry soon after cleaning.Take some lukewarm water and a detergent and a soft brush or sponge. Working from the top of the tent to the bottom, wash off any dirt. After the dirt has been removed, allow the tent to dry completely.

Sealing the seams

If you wish to reproof the tent completely, you should start by using spraying the seams, which is a fairly simple process. Apply liberal amounts of spray to the seams and to both sides of the seams. Also apply the spray around the windows and doors but stay away from the zipper.

Using waterproofing spray

Dry Guy waterproofing spray is suitable for almost any type of tent that you have. Modern tents use a polyester type material but the older ones are often made of cotton canvas. Apply a thin coating of the waterproofing spray in even and smooth strokes. Make sure that the entire surface is covered and allow the waterproofing material to dry completely as per the drying time mentioned in the instructions.

Waterproofing a tent at home is the best way to ensure that you do not have to repair damage while on the camping site. With a waterproof and secure tent you can enjoy your camping trip without any hassles. However, you should still keep your waterproofing gear handy in case some mishap does occur while you are at camp.

Waterproof your tent with Dry Guy Waterproofing Spray  Video